Whether it is a small-sized bathroom or a large-sized bathroom, you can have no bathtub and no shower room, but you must not lose its presence - the basin. You see, wash your face early, wash your hands before and after your meal, do you not use the basin? But for a sanitary ware that is used so frequently in daily life, how much do you know about it? The beautiful and beautiful basin, seemingly simple, in fact, its installation process is exquisite, let's take a look at the details of the installation of the basin below!
Bathroom basin installation details:
1. The washing basin product should be flat and non-destructive. The drain plug should have an overflow hole of not less than 8 mm in diameter.
2. When the drain plug and the sink are connected, the overflow plug of the drain plug should be aligned with the overflow hole of the sink to ensure the overflow of the overflow. After the insert, the upper end of the drain plug should be lower than the bottom of the wash basin.
3. The bracket fixing bolts can be galvanized bolts or galvanized metal expansion bolts of not less than 6mm (if the wall is porous brick, expansion bolts are strictly prohibited).
4. After the washing basin is connected with the drain pipe, it should be firm and compact, and easy to disassemble. The joint should not be open. Silicone paste caulking is applied to the wash basin and wall contact.
5. If the sink drain drain and faucet are plating products, the plating should not be damaged during installation.
6. Depth is proportional to strength. Water splashes on the body, which is probably the most uncomfortable feeling for consumers. Conventionally, the depth of the washbasin is proportional to the strength of the faucet water flow installed on it, that is, the deep pool can be installed with a strong water faucet.
7, pay attention to the height. Whether it is a stand-alone or a desktop washbasin, the height of the pool or countertop is 80, 85 cm from the ground, because a pool that is too short can cause low back pain.
8, pay attention to the finish. The pool edge of the washbasin must be slightly higher than the countertop, but it must be smooth at the junction with the countertop. The purpose is to prevent the water splashed on the countertop from being wiped back into the pool without obstruction, and at the same time facilitate the cleaning of the countertop.
9. Space determines the form. The washbasin is roughly divided into a stand-alone type and a desktop type. The independent style is beautiful, the floor space is small, and it is easy to maintain. It is suitable for the bathroom with little space. But it needs to be equipped with a mirror box or a washstand to use the space above the pool to place some toiletries and cosmetics.
